Lapping Paste - Double Pack

Double Pack - Water based Paste

Chemico Lapping Paste


Chemico Lapping Paste special double pack, contains 500 gm tub medium 120 grit water based lapping paste and 500 gm tub coarse 80 grit water based lapping paste, especially formulated for back lapping of mower and cutter blades.

A range of high performance, water based Lapping Pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear and type of equipment the correct grade is available from fine to coarse. An extremely stable easy to use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf courses, municipal organisations, schools and sporting venues.

Also available in single packs »


  • Oil Free
  • Low odour
  • Easily to use
  • Improves Cutting Performance
  • Cohesive gel provides faster sharpening
  • Suitable for most types of equipment
  • Low fling formula, which penetrates to the sharpening surfaces
  • Non drying, rewettable formula, rinses with water even after standing
  • Resists slumping
  • Prevents corrosion on newly sharpened blades

Application and Storage

Adjust cutting edges to be level and within 1mm of each other and coat blades with compound using swab or brush. This can be done whilst the blades are running in reverse lapping gear but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon type of equipment and degree of sharpening needed. Run machine without cutting grass for up to 1 minute and re-apply if necessary. Readjust blades accordingly. Store between 0-35 degrees C. Store in tightly closed containers. Protect from frost.

Purchase » Purchase larger tub »

A short instructional video courtesy of Allett mowers on backlapping a cylinder mower using Chemico lapping paste.

Lapping Paste Range

Range Description
80 Grit (Coarse) for maintenance of gang mowers and rough sharpening of low cutters.
120 Grit (Medium) for fine finishing of large mowers and maintenance of low cutters
220 Grit (Fine) for ultra fine finishing of ornamental cutters
Generic placeholder image
Material Safety Data Sheet »