Home
Products
Contacts
About Chemico
Chemico Jointing Cement
Method of Applications

Contains Shellac & Graphite
Supplied in 125 ml tamper evident plastic tubs
Available in carton of 72 units

Home | Products | Contacts | About Chemico | Chemico Grinding Paste | Chemico Jointing Cement | Chemico Double End Valve Grinding Paste |Lapping Paste

Always consult manufacturer’s handbook/manual before commencing any operation and follow instructions given fully.  This information is supplied for information and is based on laboratory and practical experience.  In view of the wide range of applications and conditions of use no liability is accepted for any loss or accident which occur from its use or application

Chemico Jointing Cement

Materials Safety Data Sheet | Jointing Cement

<<BACK

Apply a coat of Chemico Jointing Cement to each joint face and allow it to remain a few moments until the jointing becomes tacky. Close the joint. For screwed joint, apply one coat to each mating thread and screw up immediately.

For joints containing washers/gaskets of cork or absorbent material, apply one coat to each side of the washer or gasket and allow this to soak in. Apply a second coat  to the joint faces, allow it to become tacky and then close the joint.

Home | Products | Contacts | About | Grinding Paste | Jointing Cement | Double End Grinding Paste | Lapping Paste